Parts for General Motors

Per page:  

SKU: P85387
Cowl, Pillar, Trim Panel & Windshield Retainer - 13mm Top Head Diameter; 16.5mm Middle Head Diameter; 18mm Bottom Head Diameter; 10mm Stem Diameter; 14mm Stem Length; Blue Nylon

SKU: P85369
Door Panel Retainer - Fits 7.4mm Hole; 13mm Stem Length; 20mm Overall Length; 0.7mm - 0.9mm Panel Range; Blue Plastic

SKU: P85368
Door Panel Retainer - Fits 7.4mm Hole; 16mm Stem Length; 20mm Overall Length; 1.75mm - 2.0mm Panel Range; Green Plastic

SKU: P85363
Fender and Headliner Retainer - Fits 7mm Hole; 25.4mm Head Diameter; 26mm Stem Length; 29mm Overall Length; 1.0mm - 13.0mm Panel Range; Black Textured Plastic

SKU: P85362
Tail Lamp, Fender Apron, License Plate and Door Panel Grommet - White Plastic w/ Seal; Fits 9mm Hole; 18mm Flange Diameter; 18mm Overall Length; 0.8mm - 1.0mm Panel Range; M6 Screw Size

SKU: P85352
Grille Retainer Nut - 13mm Hex Size; 7mm Overall Height; 25mm Washer Diameter; Black Nylon; Use with P85351

SKU: P85351
Grille Retainer - 25mm Head Diameter; 5.8mm Stem Diameter; 25.5mm Stem Length; Black Nylon

SKU: P85343
Rear Bumper Cover Multi-Grip Type Blind Rivet - 1/4" Diameter; 0.080" - 0.350" Grip Range; 1/2" Flange Diameter; Aluminum/Steel

SKU: P85342
Front Grille, Bumper and Rocker Moulding Blind Rivet - 5mm Hole Size; 3.0mm - 6.0mm Grip Range; 9mm Flange Diameter; Black Nylon

SKU: P85341
Metric Flat Push-On Retainer - Fits M6 Stud; 24mm O.D.; Steel; Zinc Finish; Use on Non-Threaded Fasteners

SKU: P85338
License Plate Screw - M6-1.0 Diameter; 12mm Length; Combo (Phillips and Slotted) Drive Type; Truss Head; Steel; Silver Dacromet Finish

SKU: P85331
Rocker Panel Moulding Clip - 2" Length; 7/8" Width; Gray Nylon

SKU: P85322
Headliner Retainer - 25mm Head Diameter; 7.5mm Stem Diameter; 22mm Stem Length; Tan Nylon

SKU: P85320
Door Trim Push-Type Retainer - Fits 6mm Hole; 12mm Head Diameter; 17mm Stem Length; Black Nylon

SKU: P85316
Rocker Panel Moulding Clip with Sealer - Fits 9mm Hole; 11mm Stem Length; 12mm x 20mm Bottom Head Size; 12mm x 20mm Top Head Size; White Nylon

SKU: P85314
Door Panel Retainer with Sealer - 14mm Top Head Diameter; 16mm Middle Head Diameter; 18mm Bottom Head Diameter; 9mm Stem Diameter; 10mm Stem Length; Green Nylon

SKU: P85313
Fuel Tank Shield and Miscellaneous Push-Type Retainer - Fits 10mm Hole; 26mm Head Diameter; 12mm Stem Length; Black Nylon

SKU: P85309
Radiator Grille Nut - #8 Screw Size; Steel; Zinc Phosphate Finish

SKU: P85299
Headliner Retainer - 25mm Head Diameter; 8.5mm Stem Diameter; 27mm Stem Length; Tan Nylon

SKU: P85298
Headliner Retainer - 45mm Head Diameter; 9.5mm Stem Diameter; 20mm Stem Length; Tan Nylon

SKU: P85271
Hood Insulation Retainer - Fits 7.1mm Hole; 28mm Head Diameter; 16mm Stem Length; 20.5mm Overall Length; 2.5mm - 4.5mm Panel Range; Black Textured Plastic

SKU: P85260
Bumper End Cap and Fender Apron Retainer - Fits 6.3mm Hole; 18mm Head Diameter; 20mm Stem LengthPlastic

SKU: P85259
Front Bumper and Rocker Moulding Retainer - Fits 10mm Hole; Plastic

SKU: P85258
Door Lock Rod Clip - 5/32" Rod Size; Gray Nylon

SKU: P85256
Rocker, Pillar and Floor Moulding Clip - Fits 11mm Hole; 18mm x 38mm Top Head Size; 33mm Stem Length; 22mm x 40mm Bottom Head Size; Black Nylon